Back-lit LCD,from 1x5 up to 4x20 characters,powered by PLC

Mã sản phẩm: XBTN400

Hãng sản xuất:

Hết hàng

Giá: Liên hệ

Mô tả sản phẩm
Bình luận

XBT-N400

Magelis XBT-N compact display units are designed for use with Telemecanique Twido, Nano, Micro and Premium PLCs They are used to display status messages and maintenance information as well as process data. Various function keys can easily be configured to modify parameters, issue machine control (eg. START/STOP), or browse through text information menus and pages.

All the Magelis XBT-N compact display units have the same ergonomic user interface as follows:
2 fixed legend, service keys (ESC, ENTER), which are non-configurable
2 fixed legend, left and right arrow keys, configurable as links to different pages or for machine control
4 configurable and legend customisable keys (two can be up and down arrows as shown below). The legends are changed by sliding a choice of legend strips behind the front membrane before panel installation. These four keys can be used to latch or toggle PLC bits, to call other pages, or to increment digits in a numerical value (rather like the function of a mechanical thumbwheel)

Key characteristics
	XBT-N400
Stock No	493-3415
Display Type	LCD (matrix) with green back light
Screen Capacity	(122 x 32 pixels)
Character height x width	From 1 line of 5 characters (17.36 x 11.8 mm) to 4 lines of 20 characters (4.34 x 2.95 mm)
Active screen area	72 x 20mm
Signalling LEDs	None
Pages per application	128 application pages (2 lines/page max.)
Scrollable messaging	No
Real-time clock	Access to the PLC real-time clock
Transmission	Asynchronous serial link RS 232C/RS 485
Downloadable protocols	Uni-Telway, Modbus
Power supply	Powered from the PLC
Connection	Point-to-point
Panel cut-out	119mm wide x 63mm high
Front Fascia	132mm wide x 74mm high. (allow 104mm height for mounting clips)
Minimum panel mounting depth (including space for rear cables)	78mm with XBT-Z978 cable